// TFT项目的一些配置，比如角色等
module.exports = {
  roleList: [
    { id: '1', name: '加工人员' },
    { id: '2', name: '质检人员' }
  ],
  productionLineList: [
    { id: '1', name: '产线1' },
    { id: '2', name: '产线2' }
  ],
  sparePartsTypeList: [
    { id: '1', name: '边磨备品备件' },
    { id: '2', name: '清洗机备品备件' },
    { id: '3', name: '前清洗备品备件' },
    { id: '4', name: '后清洗备品备件' },
    { id: '5', name: '面磨区备品备件' },
    { id: '6', name: '终检区备品备件' },
    { id: '7', name: '动力区备品备件' },
    { id: '8', name: '辅材备品备件' }
  ],
  statusList: [
    { id: '1', name: '正常' },
    { id: '2', name: '禁用' }
  ],
  unitModuleList: [
    { id: '1', name: '精切磨边' },
    { id: '2', name: '磨边后清洗' },
    { id: '3', name: '边检' },
    { id: '4', name: '面研磨' },
    { id: '5', name: '面研磨辅助设备' },
    { id: '6', name: '面研磨后清洗' },
    { id: '7', name: '终检' },
    { id: '8', name: '内包区' },
    { id: '9', name: '外包区' }
  ],
  testItemList: [
    { id: '1', name: '研磨幅' },
    { id: '2', name: '外观尺寸' },
    { id: '3', name: '角尺寸' },
    { id: '4', name: '直线性' },
    { id: '5', name: '翘曲' },
    { id: '6', name: '成品厚度' },
    { id: '7', name: '应力' },
    { id: '8', name: '条纹/磨痕度数' }
  ],
  orderTypeList: [
    { id: '1', name: '全部' },
    { id: '2', name: '正常' },
    { id: '3', name: '待再加工' }
  ],
  orderStatusList: [
    { id: '1', name: '全部' },
    { id: '2', name: '已下发' },
    { id: '3', name: '未下发' },
    { id: '4', name: '已结束' }
  ],
  planTypeList: [
    { id: '1', name: '全部' },
    { id: '2', name: '年计划' },
    { id: '3', name: '月计划' },
    { id: '4', name: '日计划' }
  ],
  regrindList: [
    { id: '1', name: '无' },
    { id: '2', name: '锡面' },
    { id: '3', name: '空气面' }
  ],
  productionSpecList: [
    { id: '1', name: 'G8.5' },
    { id: '2', name: 'G8.6' }
  ]
}